Ten Things You Should Not Share On Twitter

Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to safeguard cars from key cloning or hacking is a discreet device which can be put in place without causing any damage to your vehicle. It will not allow you to start your vehicle unless you press the correct sequence of buttons in your vehicle. This is similar to the mobile password.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by stopping the engine from running until it is issued the correct PIN code. This is done without modifying the vehicle, and is largely undetectable by thieves. The unit is directly connected to the ECU through the CAN databus to immobilise a vehicle. This system is similar to the one car manufacturers have been using in their cars for years however, the criminal can't add a new key or utilize key relay technology to bypass it like they can with factory fitted systems.

Ghost is compatible with any vehicle that has an engine, which includes motorhomes, cars, vans and caravans, as well as bikes. The same system is also compatible with electric cars. It's a great alternative to locking the steering wheel and wheel clamps that can be installed with a minimum of effort.

When the Ghost is activated, it will block all the buttons in your car and stop the ignition from being started unless a PIN code has been entered first. This can be done using the Android or Apple mobile apps or by entering the code via your key fob. If the incorrect code is entered, the app will display an indicator light. The Ghost will not let the vehicle to start again. This is a great method to discourage thieves. If the vehicle can't be started and they are unable to get it started, they will leave.

The Ghost is tiny weatherproof device that can be hidden in the most difficult to reach parts of your car. The installation process takes between 20 and 30 minutes for each vehicle. It is also very easy to remove should you decide to move your vehicle around or give it away to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by a number of insurance companies. It also features a secure emergency Pin Code Override, and a Service/Valet mode that can be activated by pressing a button in the app, or by using your key fob.

Disarm

Contrary to the mechanical devices, which can be removed, ghost immobilisers are hidden and are integrated into the car. They are nearly impossible to bypass or hack and, even if they are discovered, thieves is unable to start the engine. Ghost immobilisers are protected from key cloning, as well as devices spoofing signals and signal jamming. These are the methods thieves employ to gain access into vehicles equipped that have standard immobilisers.

The immobiliser sends a code to the ECU. If the incorrect code is received and the vehicle does not start since the engine won't start. While it is possible to disable the ghost immobiliser with software, this would be very lengthy and complicated. Only an authorized installer is able to install and use the software.

The ghost immobiliser car immobiliser, a tiny device, is hidden within the vehicle's wiring loom. It is inaccessible to the naked eye after it has been installed. It will not show up on diagnostic systems, there aren't LED indicators, and it does not communicate with the engine via the OBD port. It communicates in silence through the CAN data loop.

The system won't allow the vehicle to start until it receives an input PIN code that is entered by the user. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a safer way to safeguard your car as it does not require the use of keys or a remote control.

In addition to this Ghost offers an option for service that can be activated using the application on your mobile phone. This lets you hand over your keys to someone else for valet parking or service without the need to enter a disarm sequence.

It is not recommended to remove the system from your ghost immobiliser tracker by yourself, regardless of whether it's in service mode. This can damage your engine. It is recommended to speak with a TASSA-verified installer who can safely and properly remove the system. Our newest ghost immobiliser and tracker immobilisers have a specific fingerprint QR sticker, which is hidden in various parts of your vehicle. These are linked to our security register. In the event that the device is removed and then sold on the black market, this will allow you to trace the owner of the system.

Anti-Hijack

The anti-hijack feature is a very important feature of the Ghost Immobiliser 2. It functions like an intelligent key and is among the most secure ways to ensure your car is safe from thieves. The ghost immobiliser problems system will automatically turn on the hazard light and stop the engine when the ignition is switched on and the vehicle is in a stationary position. This gives the driver and passengers enough time to press the security button before the system can be activated.

The Ghost system, unlike most competitors, utilizes a timer and controller unit which shuts down the valve for shut-off of fuel 14 after a set period of time. This is regardless of whether the ignition is on. The delay time frame must be long enough to allow the owner of the vehicle who was hijacked of the vehicle to move away from the site of the incident and to maintain a sufficient distance from the vehicle in which it is stuck before the system can reactivate.

The Ghost has an additional level of security that prevents common hacking techniques used to gain access to modern vehicles, such as relay attacks and key range extending. This is due to the fact that the Ghost system communicates silently and doesn't emit any signals that could be detected by thieves using code grabbing or RF scanning technology.

The Ghost system has the valet or service mode which allows your vehicle to temporarily be started and driven, without the need for PIN code. This is ideal for those who park their car and only need to leave it briefly in order to open the garage door or put groceries in the boot. The system will end service mode based on speed and time or by using the easy PIN code input process, giving you complete security knowing that only YOU are able to utilize your vehicle!

Keyless Entry

Many customers are seeking out additional security measures due to the increasing trend of car thefts using contactless technology. This is especially applicable to those who have put in time or money into personalising their vehicles and own expensive or rare vehicles. Add-on immobilisers can be a good way to deter this kind of theft, because they will stop your vehicle from starting until the correct pin code is entered along with your key fob.

Immobilisers are designed to intercept the various circuits in a vehicle such as ones that control the starter motor and the fuel pump. They also can shut the car ghost immobiliser alarm to draw attention to and frighten away any potential thieves.

These devices are directly connected to the engine control unit via the CAN data network and hinder thieves from gaining access to it by installing a new ECU or using key programmers. These immobilisers are installed discretely inside your vehicle, leaving no traces and are undetectable by the tools that sophisticated thieves use.

As opposed to other systems that require a separate app, or a tag that is worn on the person of the driver, a Ghost immobiliser can only be deactivated by pressing a sequence of electronic buttons that are already present on your steering wheel, door panel, and centre console, allowing you to choose a custom pin sequence. The pin can be changed as often as you like, meaning it's as secure as a credit card. It can be more difficult to hack because it requires at least 20 presses.

Ghost also offers the Valet/Service mode, which allows you to disable the system when your vehicle is to be turned over to valet parking or services and allows it to work within certain parameters, like a 30mph speed limit and you don't have to worry about your car being driven in reckless manner. It can then be reactivated with the original key or the corresponding entry code.

This makes it the most effective and secure aftermarket CAN immobiliser available on the market and is fully insurance approved by Thatcham as an accessory for your car when installed by one of our accredited installers. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact card with your unique QR codes and an emergency code that is safe. These are all kept in your purse or wallet.