The Ultimate Glossary Of Terms About Window Handles

Upvc Window Handles Replacement

The replacement of your window handles made of upvc casement window handle (linked resource site) is a simple process that requires only a few tools and steps. The key to successful replacement is to identify the type of handle you want and measuring the length of the spindle.

There are two types of upvc handles: Cockspur and Espag handles. Espag handles come with a a 7mm square spindle which engages the locking mechanism on the frame.

Espag handles

Espag handles are one of the most sought-after types of window handle that are available for windows made of upvc and some timber frames as well. They are designed to work with locking window handle systems that use espagnolette. They feature seven millimeter square spindles that protrudes from the back of the handle and is then inserted into the gearbox of a multipoint lock system inside the window. They are available in a variety of sizes of spindles. This is because every type of window handle is usually connected to a different multipoint locking system, which has distinct layout and positioning of the gearbox.

The typical specifications for espag window handles include a push-button for the 'locked' closed position, key-locking and fire escape non-locking (where necessary). Some even exceed Secure by Design standards, which will give you added peace of mind. Typically, they are attached to the sash using two screws that are 43mm apart.

There are a few variations to the espag window handle, especially the in-line and the cranked version. In-line handles can be turned both left and right. Cranked handles only work when the window is moving in the same direction. They can be set up clockwise or counter-clockwise. The handles can be fixed to the window in either direction but they must be pointing in the same direction as the cockspur handles.

When selecting the replacement window handle, it is important to be thorough and determine the spindle's measurement. The spindle is a metal bar that extends out from the back of the handle. It can range in length between 10mm and 55mm. The length is what is visible when the handle is in its original undamaged condition. You'll need to match this when purchasing an entirely new handle because the spindle is what is driving the lock inside the window.

Some manufacturers now offer magnetic espag handles that can eliminate the requirement to cut the spindle to size. This can simplify the fitting process as it is faster and easier to remove a replacement and insert another. However, it is recommended to take the time to check the spindle length to ensure the smooth operation of your handle.

Cockspur handles

Cockspur handles can be found on older uPVC or aluminium windows. They do not have an locking mechanism, however they are considered safe as the handle's nose opens into a wedge-shaped piece that is fitted to the frame of the window. (This kind of handle should not be confused with timber frames, which feature an opening). Cockspur handles are still well-liked and there's an array of styles to match the kinds of door.

They are a budget-friendly and easy choice. They can also be key-locked to comply with the requirements of insurance. You can also select the handle height to suit your frame. A lockable version, which adds an extra level of security and has been endorsed by Secured by Design, is also available.

These handle types are fixed to the sash of a casement or tilt and turn window by using a spindle which runs through the handles baseplate. The handle is operated with the lever that is located on either side of the handle and the handle spindle is then engaged with the striker wedge that is attached to the frame of the window to lock it into place. Cockspur handle kits are generally supplied with the left and right hand versions, and a wide selection of nose heights that will fit most frames.

The most important thing to consider for the successful installation of cockspur handles is obtaining the correct size wedge block. It is essentially a small block of plastic designed to look like a ramp and you can replace the old one with a new one that is slightly larger in size to ensure that the handle closes correctly across the gap in the window to seal against draughts. The fixing positions of these handles are standardised and usually range between 38mm and 58mm in size. You should be able to find the correct replacement without much difficulty.

Another aspect to take into consideration when selecting the new set of cockspur handles is the spindle length. This is the distance between the handle baseplate and the point where the shaft extends from the sash to the frame. It is important to set this correctly to ensure that the handles operate smoothly.

Tilt and Turn Handles

These handles are specifically designed for tilt-and-turn windows. They are available in nonlocking, locking, or tilt safe choices. These heavyweight handles have a strong grip and detents are located at 90 degrees. They are available in a variety of finishes including white, black, gold chrome, brushed satin and chrome. Fits timber or PVCu tilt-and-turn windows.

These handles can be used to replace the cockspur made of upvc that was used on older windows without locking. However, be aware that these are different to upvc espag handles as they aren't locked and operate differently.

The 'turn before tilting' mechanism allows the window to tilt to the outside and then drop into a ventilated or hopper-style position to breathe fresh air. This kind handle is also referred to as a DK or dry-keep window handle. It's often used on older double-glazed windows in commercial or residential properties.

When replacing a tilt and turn window handle loose-and-turn window handle, there are a few things to keep in mind. It is important to first make sure that the handle you pick is compatible with your windows. This includes examining the size of the spindle. The length of the spindle is the length of the metal rod that extends from the handle and into the locking mechanism. The longer the length of the spindle, the more secure it will be.

The handle is usually attached to the frame or the base of the fix window handle using a screw located either above or below it, depending on the design of the window. You can use a screwdriver remove these screws and then take the handle off. Before doing this, it is recommended to place the handle in an open position to allow you to get to both screw holes.

Once the handle has been removed you should be able see two screws that need to be removed which will then reveal some decorative screw caps. They can be removed with the flat-head screwdriver, and then the handles can be removed. The cap on the screw can be replaced after the handles are back in their original position on your windows.

Take a measurement of the length of the spindle

The spindle of a window handle decides the way it will open and close. It's important to measure the old handle and then compare it with the spindle length of the new one. This will ensure that your new handle fits the window correctly and will be easy to open and close.

If you are looking to replace your handles or improve the appearance of your uPVC window the style of the handle will have a significant effect on how the window opens and locks. There are various handles to choose from, including inline espagnolette and cranked. There are also tilt-turn handles designed to be used with a tilt-turn uPVC window that can open both ways.

To replace windows handles first, locate the screw caps that secure it. These are located either above or below the window handle and can be removed using the screwdriver. Once the screws are removed, you can take the handle and the spindle from the window frame.

The handle can be removed from the window frame, and replaced with a brand new one. Make sure that the new handle is put in the same spot as the old handle and that the spindle aligns perfectly with the lock mechanism. Once the new handle has been installed, it's time to secure the handle by replacing the screws. Then, you can put the caps back on If they're missing.

It is possible to replace the handles on your uPVC window in the event that they break. The handle might break because of a powerful force or the female part which the spindle is placed into may be worn down. This could be caused by the household member who is pushing the handle to lock.

The best way to replace your window handle made of uPVC is to get a high quality one that lasts for an extended period of time. This will save you money in the end. It will also give your home an updated and appealing look.