10 Misconceptions Your Boss Has Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers to assist the new pane to fit correctly into the window repairs frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you may think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues that include sliding. A sagging uPVC window repairs near me could cause issues with light, draughts and even security. It is crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows to access the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window repair near me handle yourself. First, you'll need to close the window and then perform a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if you wake up every morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the issue is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window repair is difficult to open, or if it opens with an ease. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is an easy procedure, but it is easier to do if you have someone to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is located on the hinge of the window, may be misaligned. Again, it is possible to give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional immediately.