17 Signs You Work With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. If you have double glazed window repairs near me-paned windows that are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, you will need to source some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is large, you might think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window repairs near me is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the size of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. It is important to replace your seal as soon as you can in order to keep your upvc window repair near me window waterproof and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle getting worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most often, uPVC Window Repair leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do when you have a person to assist in holding the frame in place.

Check that the uPVC hinges open and close in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges can also be misaligned due to wear, which can cause an opening where the sash and frame meet. If they are damaged beyond repair, it might be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it may be feasible to give them a good clean, but in some cases it might be necessary to have these replaced.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use an draught excluder. These are usually fabric tubes filled with some type of filler. They can be placed on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.