10 Inspirational Graphics About Replacing A Window Handle

Tips For Replacing a Window Handle

It is simple to change your window handle in the comfort of your home. Follow these guidelines to ensure an elegant and smooth finish.

Start by removing the screw covers to reveal the screws within the uPVC window handle. Measure the spindle's length to ensure you get the right size replacement.

1. Determine the length of the Spindle.

When you're replacing a window handle it's important to determine the dimensions of the spindle correctly. This is because it could determine how tight or loose the handle is, and whether it's able to lock properly in the frame of the window. The spindle is a metallic shaft that connects the handle to the lock in the window frame. The spindle is either a standard industry 8mm cross-section or the earlier 9mm versions. The modern industry standard is 8mm but this wasn't always the case so when buying a new handle it is important to check the measurements.

Remove the handle. This is easily done by turning the handle in the open position, then taking off two screws that hold the handle in place (which are usually hidden behind plastic caps which are required to be removed). After removal, measure from the base of the handle to the end of the spindle. This will provide you with the measurements you need to buy a new one.

There are many options available when you are looking to pick the perfect window handle. From sleek chrome that can fit in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or even the more traditional Tudor Cottages with curled mongoose-tail latches. The possibilities are endless, but the most important thing to do is choose a style that complements your home.

Espag handles are commonly installed to uPVC window frames and are always the same size with a 43mm center. Cockspur handles are available in a range of sizes, ranging from 58mm to 62mm. Cadenza window handles are a different size again since they have an angled blade which operates an interlocking mechanism that is multi-point inside the window.

When choosing a window handle, you should also consider the hand you use to open your external Door handles. Inline Espag handles can be used with right or left-handed windows. Cranked window double glazed handles are hand-operated and are only used on windows that open in only one direction.

2. Remove the Handle

The handle may be damaged or just worn out the handle of a window that is shattered can be a real pain. The good news is that you can replace a uPVC handle by yourself. You only need some basic hand tools and some time to complete the task.

First, you must open the window and ensure that it is not locked. The next step is to remove the screws which hold the handle in place. Once these are removed, you can begin working on the removal of the handle itself.

The handle is connected to a spindle within the window frame. Depending on the type, this is held in place either by a screw or pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both of these kinds of handles are used on casement windows, as well as aluminium windows. You can lock the handles by using a key to prevent unauthorised access from the outside. You can also lock the handles by turning them clockwise.

To remove the handle, you'll need a screwdriver with a flat blade to remove the clip that holds the handle in place. When this clip is released the handle will slide off the spindle. Once the old handle is removed, you'll have to measure the spindle length and make sure that your new handle will fit.

Once you have the proper size, you can now put the new handle in place. You will need to make sure that the new handle is securely attached and that it turns in the correct direction (clockwise for open, or counterclockwise for closed). It is also important to make sure that it is not fitted upside down.

Replace the cap screws. After you've done that then you can test the handle to ensure that it works properly. You can also test the locking system by moving the handle from an unlocked position to the locked one and then back.

3. Take off the Screws

A uPVC handle is a crucial part of any house and is the first item to show signs of wear or damage. This could be due to natural causes or from regular use and sometimes even deliberate damage by opportunistic criminals who might wish to open a locked window to gain access to your home. A simple fix can resolve the issue and stop it from repeating itself.

UPVC handles can also be difficult to remove when the locking mechanisms are not working properly. Often, the problem can be resolved by replacing the multipoint lock, rather than the entire handle and it's worthwhile to check this out as it can save you money.

After you have removed the handle, you'll need to remove any screws that were holding it in place. These screws are usually found on the inside of the handle base. You may need to use a screwdriver for this and it's crucial that you don't over tighten the screw as this could cause the handle to become loose.

The next step is to locate the fixing pins or screws that hold the new handle in the correct position. These are likely to be located on the inside face of the base of the handle and you'll need an screwdriver or a pair of pliers in order to remove the screws. Once they're removed you will be required to replace the caps on the screws should you choose to do so and test the new handle to ensure it's working properly.

When you're ready to install the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it in the appropriate position. If you're looking to replace the screws, make sure the handle is in an open position and any screws are securely attached. Once this is complete you're done and are able to enjoy your new window handle. This should allow you to avoid costly window and bifold door handle replacement replacements in the future. Contact us if you require more information about this or any aspect of your uPVC window.

4. Fit the New Handle

The replacement of a damaged double glazed window handles handle or updating it is simple and can be accomplished in only a few simple steps. Identifying the type of window handle, measuring its spindle length and knowing the tools you'll require to complete the task are essential. Safety is always the primary priority when working with tools and windows. Be sure to follow the steps and ensure that you have the right handle for use.

To begin, locate the screws that hold your window handle. Take them off while holding the handle firmly to prevent it from falling and causing injury. After the screws have been removed, you can put them in a safe place to be replaced in the future.

Once the old handle has been removed, you can now begin to fit your new one. It is essential that the handle fits perfectly to ensure that it works properly and locks the window in its place. The next step is to slide the metal square at the back of the handle into the hole of the window mechanism, making sure it is securely in place.

The final step is to replace the caps on the screws and then test the handle to make sure it is working. If you aren't satisfied with the results or if the window doesn't open and close as it should the next step is to call our experts who will be able to help.

Almost all UK homes are equipped with uPVC Windows. As such, many will require replacement at some point because of wear and tear or breakage. Anyone with a bit of DIY experience can easily complete the task. It is important that the handle you choose matches the dimensions and style of your window. Contact our team if you are unsure about the type of handle you need. They will be able guide you through the options.