The 10 Most Scariest Things About Replacement Upvc Door Handles
Replacement UPVC Door Handles
If you're replacing the handles for patio doors or want to add a bit of extra security, you'll find the right handle for your door. These handles made of upvc chrome door handles are easy to install and have the 92mm minimum centre distance of multipoint locks.
The most important measurements to be considered are the backplate fixing centers and key hole dimensions and levers. Compare these measurements with your current marks before making a purchase.
Lever/Pad
Lever pad handles are made up of a lever on one side, and a paddle-shaped handle on the opposite. They are designed to work with key wind locks however, they can also be fitted to multipoint split spindle patio door handle replacement locks (though you will need an additional dual spindle lock case).
Our range of upvc handles lever pads are available in a wide variety of finishes and these will be shown in the drop-down menu after you have selected the correct handle for your door. Certain styles of handles are not available in all finishes. It is recommended to check the technical drawing and dimensions sections for the particular item that you want to ensure that you receive the correct size and fit.
When selecting a new set of lever pad door handles made of upvc, it is important to ensure that they match the PZ (distance between the spindle of the handle and the center of the hole in the cylinder) of your current multipoint door locks, as these need to be in line for the doors to remain locked, either from the inside or outside. Our handles are designed to fit most conventional cylinders, but it is important to double-check before purchasing.
You will need to remove the handles on your current handle and remove the lock case if upgrading to dual spindle handle levers as this will require a split inline cylinder. You can purchase these separately. We have included a technical diagram in the images of each product.
It is a good thing to loosen the screws that hold your door handle, and then check the mechanism. You may have to loosen the screws further in the event that they are not tight. Then you can remove the old spindle and handle and install your new upvc door handle. It is important to ensure that the handle is in the correct position before fixing it. You can do this by placing your finger between the door frame and the handle, to ensure that it's in the right position.
Lever/Lever
The lever handles on doors are used to operate a multi-point lock that uses an Euro cylinder. They are found on a variety of double upvc doors as well as wooden and aluminum doors. They have a lever inside and an outside paddle and are generally available in two varieties. Sprung - These include a spring cassette installed within the backplate, which helps bring the handle lever to the horizontal position. Non-sprung - these do not have a spring mechanism and must be manually pulled to bring the handle lever back to its horizontal position.
To fix a sagging door handle lever, you'll need to find the detent access pin or hole. It's usually a small hole or protruding ring, or rectangle, found on the handle base plate. Once you have located it, loosen the set screw using the help of a screwdriver, and then remove it to release the lever, allowing it to return to the horizontal position.
Once the handle has been placed horizontally, you can install the screws. Make sure to tighten them so that the handle is securely fixed to the base plate. Consider applying a threadlocking solution to the threads of screws to increase grip and prevent them from loosening over time.
There are many reasons that door handles for levers slide. The most frequent cause is that the fixings aren't tight which causes the lever bearing to pull against the door. It could also be that the levers haven't been operated at the correct angle, which causes compression of the latch mechanism and prevents it from fully springing into operation.
Another reason is that the sprung lever is not functioning properly and this is usually due to the spring not being in the correct position within the backplate. The most effective way to determine this is to turn the handle to check whether it returns to its horizontal position.
It is important to repair any door handles that are damaged as soon as you can. This could lead to excessive wear on the screws and the handle may even be able to fall off the base plate. It is also a good idea to tighten all loose screws regularly to help to prevent them from becoming loose.
Lever/Snib
These upvc handles are called "Snib handle sets" and feature an snib lock button located at the top of the door lever. If you don't have a dummy locking device you can use this feature to lock the door. These door handles are fitted with a Fullex lock 68PZ. (68mm between spindle and the centre of the lock). We also have a range of other 68PZ door handles from various manufacturers, including Ferco and Fab & Fix.
You can update your home by changing the door handles regardless of whether you're replacing existing handles or installing new ones on doors that you constructed. There are various styles available for upvc door handles, including the classic lever on backplate. Other options include curved or straight short latches, as well as Dummy knobs for multi-point locks. These are perfect for French doors.
Rose door handles are oval or circular versions of lever-on-backplate handles. These kinds of door handles come with a lever or knob on a backplate which is placed behind the lever or knob and is often referred to as a rosette, although some backplates can be removed to be concealed for fixing.
There's a wide selection of chrome and coloured finishes for these handles to complement your door and other hardware, like hinges, knobs and bolts. Some handles come with screws that grub the knob or lever securely to the spindle. Some handles are equipped with bathroom spindles that are suitable for bathroom locks. They also have a thumbturn release mechanism and can be used on doors for bathrooms.
Mortise
If your front door's uPVC handle is stuck in the open position, the problem will most likely be with the tubular latch. There are a few things that can cause this, one of which is a simple lack of lubrication on the latch plate. This can be resolved quickly by opening the door and spraying lubricant on the handle and lock. It could also be that the latch has come loose from the backplate. This could be more complicated and will require a specialist to fix.
A multipoint handle system is the best solution for stuck door handles. The handles are positioned through the faceplate and operated with a key or thumb turn knob that activates the cam that locks the deadbolt. The handles are available in a variety of sizes that will fit various types of uPVC doors and come with a variety of attractive finishes to match existing hardware. These handles can be purchased via the internet or at the local locksmith. They are simple to install and come with clear directions.
You'll need to know the PZ size of your cylinder in order to choose the correct replacement handle set. This is the distance from the edge of the inner frame of the door to the central edge of the hole in the handle in millimetres. You should also be aware of whether your door has hook locks or a mortise style lock. Once you know these measurements, the most efficient method to locate the correct handles is to use the filter by brand option on the website. This will narrow down your options, and you will then choose the appropriate size from the list.
A typical handle set comes with the handle unit and a pair of different length screws drilling guides, as well as installation instructions. The smart versions, such as the Igloohome Smart Mortise 2+ includes a complete mortice lock with a built-in keypad. These are more complex models that are best designed for professional installers or highly skilled DIYers. Some handle sets come with various accessories, including weather strips, which can be used to improve the appearance of the door.