Door Handle Replacement Tools To Facilitate Your Everyday Life
Door Handle Replacement
Door handles may seem like a small detail however, if you don't like the way they look or are unable to use them, it's worth replacing them. Installing a new door handle is easy if you have patience.
Modern door handles are often equipped with cover plates that hide the screws for an attractive appearance. If the new handle doesn't have screws already connected, you'll have to attach them separately.
Removing the old Handle
The door handle isn't only a decorative addition to your home, but it's also a safety feature that allows you to lock and unlock the door. As time passes the door handle can begin to lose its grip or feel a bit loose. It might be beginning to appear worn out and old. This is a sign that it's probably time to replace it.
One of the first signs that your door handle repairs handle needs replacing is if it's becoming difficult to operate. This is a problem because it means that you can not lock or unlock your door which could pose a security risk for you and your family.
Another reason to replace the door handle is if it's damaged or broken. A broken door handle is dangerous, especially for elderly and children members who might struggle to open it. They may get trapped. Luckily, it's quite easy to fix a broken door handle by replacing the old one.
The majority of modern door handles are a standard size and therefore will fit on any door. If you're not certain if the new door handle you are buying will work, take out the old one and measure the holes in its housing. This will allow you to purchase the correct size door handle.
The easiest method to remove the handle from your door is to remove it from the door. This is usually done using the screw driver. Some door handles come with an enclosure plate that hides the screws that mount them. You will need to remove the cover plate to gain access to the screws. Once you've removed your old handle, take an outline of how the spindle is attached to ensure that you can be sure to align it when you install the new one.
Alternatively, you can remove the door handle by removing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. But, you'll have to locate the small latch, which is located on the edge cut piece. After you have removed the latch, you can take the handle off the strike plate, and then the latch from the door edge.
Take off the Strike Plate
When you replace your handle, you'll want to replace the latch plate, which holds the hole that the door's latch hooks into when it closes. The new handles will have two latch plates that are circular and rectangular plate (see the above diagram that shows the parts of the door handle). If your current latch plate is a rectangular shape, switch it to a round one so that the latch is able to hook into the strike plate in a manner that makes the handle more comfortable to operate.
The first step is to remove the screw that holds the latch plate. These screws can be quite tight, and will require some force to loosen. If you can, it might be helpful to have another person assist with this part.
After the screws are removed and the latch plate will slide out of the door easily. If the latch plate is stuck or won't move, use a small file to scrape the edges. This can sometimes open the plate up.
Now you can prepare the new strike plate to be installed. With the screws made of wood that came with the new handles, screw the latch plate onto the inside of the doorjamb. Do not tighten the screws too much because this could damage the strike plate.
If you are not sure whether the latch plate is in the proper position, shut and open the door to see whether it locks and closes properly. If it doesn't then you'll need to adjust the strikeplate upwards or down, forward or back until the door closes correctly.
If the door is moving or jiggling, then you may need to enlarge the latch hole in the strike plate. This is more prevalent for older doors, but could be due to wear and tear hinge mortises that are too narrow or not the right size for the latch, or because of damaged or broken strike plate. If this is the case, follow the same procedure for adjusting the strike plate, using a metal file instead of an hammer and chisel.
Remove the Latch
The latch is the metal piece that is angled that is able to move through the hole in the inner edge of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also hooks into an opening in the door frame so that the door is closed. If your door wiggles when you close it, changing the latch may be all that's needed to fix it.
The screws that secure the door latch are difficult to locate, but you can usually insert a screwdriver into an insignificant hole on the trim plate and then pry the latch off. After taking off the trim plate you should be able to remove the latch as well as the bolts that hold it in place and the spindle that holds it.
If the latch doesn't easily be released you can try using the clip of a paper or tool to spring it loose from the handle mechanism. Insert the item in the slot for the latch that is recessed, and gently twist it or jiggle until you feel the that the latch and handle begin to break off. You may need to repeat this several times before the latch comes loose enough to let it out.
After the old latch has been removed, you should be able to move the new latch into the slot with no issues. Use your new screws to connect the latch to the strike plate or door frame. Make sure that it is correctly placed in the slot and aligned with the screw chambers.
Measure the existing backset (the distance between the center of the large hole on the front of the door and the edge) prior to installing the new handle. You should also check that the latch size on the new handle matches this measurement.
If you are replacing the latch or handle, or if your old lock cylinder is damaged then you will need an entirely new one. If you're not changing locks, however, a new latch should fit in your existing recess and will work just fine with the keys you have currently. Pick a latch that has rectangular cover plates that match your existing handles.
Removing the Cover Plate
door lock handle repair handles can begin to look shabby over time However, if you replace them with a contemporary lever-on-rose design, it's a quick and easy DIY project and decorating idea that will enhance the overall appearance of your home. You can buy complete sets of escutcheons, privacy adaptors, escutcheons, and escutcheons.
To replace an internal door handle take off the cover plate (or rose) that covers the screws and mechanism. Find an release tab on the plate and make use of a flathead screwdriver to remove it from the knob. It may have an opening on one side or be held by a pin.
Remove the screw that is holding the handle in the interior and put it aside after the cover plate has been removed. Remove the screws that hold both the outer and inner plates. You can loosen them with a Philips Screwdriver. Take the inner plates and latch from the double glazed door handle repair. Place them aside.
Most doors have a gap between the jamb of the door and the edge of the frame that allows for a handle, but not all do. If yours does not have a handle, you'll need to make a hole through the door. The procedure for this is similar to the procedure opening a door using locks, but you'll be taking extra care not to damage the door or frame.
After drilling the holes after which you'll have to put in new screws for the door knob. Choose the same size as the old screws to ensure that you don't get the handle that is too loose or tight. You'll also have to install the new strike rod and latch plate that aren't part of most door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great option if you're in need of a top-quality interior door handle repair plate handle replacement set. It's a factory fit and has received a plethora of five-star reviews from delighted customers. It's a great option for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.