Guide To Upvc Window Replacement Hinges: The Intermediate Guide Towards Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window replacement hinges isn't as difficult as you might imagine. Make sure that the hinges' arrows face the right way and measure the thickness of the hinge arms on the frame that opens (13mm or17mm).

There are many different kinds of hinges to pick from, each with distinct characteristics. This article will focus on the most popular kinds of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These are a great choice to replace or upgrade your fire escape safety window because they can open to a full 90-degree angle. They can also be lowered to an 'easy clean' position to allow you to easily access the exterior of your windows to clean them without having to climb a ladder or lean over at angles that could be dangerous.

These egress hinges are heavy-duty and are made by Yale one of the most known and trusted home security brands on the market today. These hinges are suitable for any kind of uPVC side-hung windows. They can be moved to the clean position by pressing in the small button and sliding the window sash to one side. After closing, the window sash will be returned to its original position.

They are available in both 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.

These hinges can be used with conventional side-hung frames made of aluminum or uPVC. They are fitted with an easy-to-use friction screw to alter the amount of resistance generated. This makes opening the window hinge repair more simple and reduces the chance of closing the window accidentally during strong winds. They have been tested for more than thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

Without buttons or catches, the Nico Egress Easy Clean Friction Hinge is simple to use and offers a practical solution to emergency egress as well as safe cleaning. Press the hinge retention clip located in the inner corner of the bottom corner. This will release both the bottom and top catches which will allow you to move the sash into the easy-cleaning position. Once you are in the clean position, close the window to reset the hinges back to their original position.

Fire-Escape Hinge

Fire Escape Hinges (also called "Easy Clean") are used to replace side-opening windows to ensure fire safety. These types of window hinges are more spacious and more efficient than standard hinges to allow an open space for escape in the event of an incident of fire. The building regulations state that this kind of hinge has to be set in any room that has a window.

They have an exclusive friction stay that opens the window to 90 degrees and allows the opening sash to slide across when open to allow easy cleaning of the outside of the glass without having to climb ladders. The hinges are easy to operate and do not have complicated buttons or catchers. They can be operated from the inside of the house with a safe, simple lever.

The hinges are produced in the UK by Cotswold and come complete with a child safety limiter for use throughout the day that can be reverted by a hidden button, providing you with peace of mind that your children will not accidentally open the window too far. They are available in 13mm or 17mm stack heights.

Measure the length of the side-hung window hinge that is fixed to the frame. (See the article on measuring the size of Upvc window hinges). Then, select the appropriate size hinge from the options below.

Note that this measurement is taken at the part of the hinge that attaches to the frame and not the sash. The actual length of the hinge could be shorter or longer depending on the way your windows were originally made. Also, when choosing the size of your hinge, most windows made of upvc will have a 13mm stack height but should your old frame has 17mm, then select the option that fits this. You can also install the 4mm packer to make up for the difference. All hinges come in two different directions (1 left and one right). Screws are not included in the hinges. If required, these can be purchased separately. Our window repair screws made of upvc are recommended. They are specially designed to improve the performance of your hinges and allow them to function smoothly for longer. They come with a lower friction design and a more durable weather seal that includes caps made of nylon.

Restricted Hinge

There are occasions when a window needs to open fully and this can be difficult with a standard hinge. The restricted child safety friction hinges are a solution to this issue and provide a solution when ventilation is required but access for cleaning or escape in the case of fire is not possible. They function by limiting the amount that the sash can open, and allow for the to override this restriction by pressing an option. They work with both side and top-hung windows and come in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinge blends the characteristics of a standard restrictor as well as an escape hinge to offer an efficient and simple method to meet building regulations. It is suitable for side hung tilt and turn window hinge covers top opening uPVC windows and is available in 13mm and 17mm stack heights. It is offered in a pair, where one hinge is the restricted egress and the second is unrestricted, allowing one hinge to be installed on the bottom of the sash while the other hinge is installed to the top.

These uPVC hinges are made to be used with windows that cannot be fully opened, like bedrooms for children. The mechanism restricts the amount the sash can open up to the safety level of 100mm and re-engages when the window is closed.

These uPVC friction-type hinges can be used with any type of windows. They are especially useful for windows that are difficult to reach, such as those in three-storey homes or ones that require a ladder. They can be combined by our security features like hinge guard protection plates or dog bolts for PAS 24 performance.

When replacing a hinge on a window, it is important to determine the length of the existing hinge to ensure that you order replacements that match in size. The easiest method to accomplish this is by looking at the hinge in the gallery and determining the best place for it to be. The hinges that hang from the top can only be positioned on one side, whereas the side-hung hinges can only be placed on one side.

Standard Hinge

Standard hinges have metal-to-metal contacts and do not require extra parts to reduce friction. It is available in a variety of finishes and has an NFPA-certified fire rating. To quickly determine the radius of hinges, lay it out flat and align a quarter and dime in two corners. If the dime fits better than the quarter, the corner is rounded by 1/4 inch; if the quarter fits better, it's rounded by 5/8 inch.

Choosing the right type of hinge can make or break your door's appearance. Matching the style and finish of the hinges to your door will create an attractive and cohesive design.