The 10 Most Scariest Things About Replacement Upvc Door Handles
Replacement UPVC Door Handles
Find the perfect handle for your door, whether you're replacing your existing handles or adding extra security. These handles made of upvc are easy to install and will meet the 92mm minimum central distance for multipoint locks.
The backplate fixing centre and the keyhole/lever dimensions are the most important measurements. Make sure you compare these to your existing marks before ordering.
Lever/Pad
Lever pad door handles consist of an elongated lever handle on one side and a paddle-shaped handle on the other. These are designed to work with key wind locks, however they can also be adapted to split spindle multipoint door locks (though you'll need a separate dual spindle lock case).
Our range of upvc handle lever pads are available in a wide range of finishes. They will be displayed in the drop-down menu after you have identified the right handle for your doors. Not all styles of handles are available in every finish and you should always look over the technical drawings and sizes sections for the specific product you are looking to ensure that you can get the correct size and fitting.
When you are choosing the new set of lever pad door handles made of upvc, it is crucial to make sure that they match the PZ (distance between the spindle of the handle and the centre of the hole in the cylinder) of your existing multipoint locks, as these need to be in line to ensure that the doors remain locked, whether from the inside or the outside. The handles we sell are designed to work with a variety of standard cylinder locks, but you should always double-check before ordering.
If you wish to upgrade to dual spindle levers you'll need to remove the existing handles and disassemble the lock case. This will require an additional split inline cylinder. They can be purchased separately and we offer an entire technical diagram for you to take a look at in the pictures for each product.
After you have removed the screws that hold your existing door handle it is recommended to loosen them and inspect the mechanism to determine what condition it is in. It is possible that you will need to loosen the screws a bit more if they are not tight. After that, you can take off the old spindle and handle and replace it with a new door handle made of upvc. Before screwing the handle into the frame, it is a good idea to check that it is in the proper position. You can do this by inserting your finger in the space between the door frame and the handle to ensure that it is in a level position.
Lever/Lever
Lever door handles function as an a multi-point lock using an Euro Cylinder and can be found on most upvc double glazed front door handles doors, aluminium doors, and some wooden doors. They are available in two types, with the lever inside and a paddle on the outside. Sprung - These have a spring cassette installed within the backplate, which helps to bring the handle lever into the horizontal position. Non-sprung: These do NOT have a mechanism to spring the handle lever into a horizontal position.
To repair a sagging door handle lever, you'll need to find the detent access pin or hole. This is usually an insignificant hole or protruding ring or rectangle located on the handle base plate. Once you have located the hole for accessing the detent or pin, you can take it out using the help of a screwdriver.
Once the handle has been set horizontally, it is possible to put back the screws. Close them to ensure that the handle stays connected to the base plate. You may want to apply a threadlocking solution to the threads of the screw to increase grip and stop them from loosing over time.
Lever door handles that droop could be the result of various causes. The most common reason is that the fixings aren't tight, causing the lever bearing to pull up against the door. It is also possible that the levers may not have been adjusted at the right angle, which stretches the latch mechanism, preventing it from fully springing into motion.
The most common reason for a sprung lever not working correctly is the spring not being in the correct position on the backplate. The most effective way to determine this is to turn the handle and see if it returns to its horizontal position.
If the door handles aren't tight, it is important to identify the issue quickly, since this could lead to excessive wear on the screws, and even to the handle falling off of the base plate. It is also recommended to tighten loose screws frequently to stop them from becoming looser.
Lever/Snib
These upvc door handles are also referred to as handle sets with a 'Snib' and feature a snib button on the top of the lever that can be pressed down to lock your door in the event that you don't have the fake lock. These door handles are fitted with the Fullex lock 68PZ. (68mm between the spindle and the lock centre). We also have a range of other door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.
The replacement of your door handle is a cost-effective option to modernize your home, regardless of whether you're replacing existing handles or fitting new ones on doors that you've built in your house. There are a variety of styles of door handles made from upvc available with traditional levers on backplate, straight or curving short latch and knob handles that resemble dummy knobs for multi-point locks, which are perfect for French doors.
Rose door handles are oval or circular versions of backplate lever handles. These types of door handles are equipped with an a knob or lever on a backplate which is placed behind the lever or knob and is sometimes called a rosette, although some back plates can be removed for concealed fixing.
These handles are available in a variety of finishes including coloured and chrome finishes to complement your door and other hardware like knobs, hinges, and bolts. Some handles have a an grub screw that can be used to connect the knob or lever securely to the spindle. Some handles come with bathroom spindles which can be used to make bathroom locks. They also have a thumbturn release mechanism, and can be used on doors for bathrooms.
Mortise
If your front door's uPVC handle is stuck in the open position, the reason is likely to be due to the tubular latch. There could be a variety of reasons for this, the most common being an unlubricated latch plate on the latch plate. It is possible to solve this problem by opening the door, spraying lubricant onto the lock and handle. It could also be that the latch has slipped away from the backplate. This is a more complicated problem that would require the assistance of a specialist.
A multipoint door handle is the ideal solution to solve the issue of a door handle that is stuck. The handles are positioned through the faceplate and operated with the use of a key or thumb turn knob which activates the cam that locks the deadbolt. The handles are available in a number of sizes that will fit various types of uPVC doors and come in an array of attractive finishes that match the hardware you already have. These handles are available online or from the local locksmith. They are simple to install and come with clear instructions.
You will need to know your PZ size of your cylinder in order to select the right replacement handle set. This is the distance in millimetres between the inside edge of the door frame and the center of the hole for the handle. It is also important to determine if the door is hook locks or a mortise-style lock. The most efficient way to locate the correct handles for upvc windows after you have the measurements is to use the filter for brands on the website. This will narrow down the choices and allow you to choose the appropriate size from the list.
A typical handle set includes the handle unit, a pair of different length screws drilling guides, as well as installation instructions. The smart models, like the Igloohome Smart Mortise 2+ includes a complete mortice lock with an integrated keypad. These are more sophisticated devices that are for professional installers or highly skilled DIYers. Some handle sets have an array of other accessories, like weather strips, that can be used to enhance the look of the door.