10 Things Everybody Hates About Double Glazing Door Lock Repairs

Double Glazing Door Lock repairs double glazed windows

Have your uPVC window or door mechanism become faulty? Maybe the window or door handles aren't able to connect correctly or are difficult to use.

You'll be wasting energy if your double glaze repair-glazed doors don't work properly. This also increases the chance of burglary. Owen the Locksmith can repair your door lock at a reasonable cost.

Snapped Key

It can be frustrating when a key snaps inside the lock. It can also be a security risk because it could leave you vulnerable to burglars if your door does not lock. Fortunately, there are quick fixes that you can attempt to fix the problem and get your door working correctly.

Be sure to remain calm. If you panic and begin doing a lot of fumbling around you may end up pushing the damaged piece of the key even further into the lock, thereby making the situation worse.

Spray WD-40, or another penetrating oil, into the lock. This will help the broken piece come out more easily. You can also make use of a screwdriver to break up any pieces stuck that could be hindering the flow. If you have a chunk of the key that's still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that could serve as hook extractors, and some Jigsaw blades can also be used for this function. If you don't have any of these handy, you can use needle-nose pliers to bend them and create hooks. Finally, you can use a pair of tweezers grab and remove the last piece of broken keys.

If you are unable to get the broken piece of key out, try using a lock de-icer. It's available at most hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these tricks are working then it's probably time to call locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure the double glazing repair glazing door mechanisms so that they are easier to use. You can schedule an appointment online for a double-glazing repair or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. It's fortunately a simple repair for professional locksmiths to complete. To fix the cylinder, locksmiths will need to tap it. They can do this with an hammer or another tools, but the most effective method is to make use of a long match or piece of wire. Then, put the end of the match or wire in the keyway. After that, the locksmith will strike the lock to crack it open. This is much better than using a heavy hammer, which could damage the lock.

The most common cause of cylinder head cracks is overheating. This can happen when the cylinder block and cylinder head are made of various metals, such as cast iron and aluminium. When various metals heat up and cool down at different rates, it could create hotspots locally that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion can be a cause of fractures in cylinders. If the cylinder head as well as the block of the cylinder are not maintained properly, this could lead to rusting or corrosion, which may cause them to expand at more than they ought to. As time passes, this may also lead to cracks.

If your uPVC window or door lock is rigid and requires more pressure to turn, it could be due to a variety reasons. A malfunctioning locking mechanism, misalignment or the wear of the handle are typical reasons for this issue.

This is a simple and cost-effective fix that a majority of double glazed window Repair glazing owners can accomplish. A professional locksmith should be able to solve this problem within an hour after arriving at your residence. They can fix the locking mechanisms, or replace the window handles, and also change the gearboxes, based on your particular requirements. A professional locksmith will be able to inform you of the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection against burglars. This is a small cost to pay for the peace of mind that comes with knowing your uPVC doors are secure.

Broken Handle

Window handle locks have complex mechanisms that deteriorate as time passes and usage, so it's no surprise that they sometimes break. If yours is damaged, it can be difficult to determine the source of the problem and make sure that you repair it correctly.

If the issue is in the internal locking mechanism or the latch, fixing your broken handle will increase your uPVC double glazing door's security and help you to stop draughts. It can be expensive to repair double glazed windows or replace your handle incorrectly and it can also damage the frame and the lock of your door.

With the window open, loosen the screw that secures the handle using the screwdriver. It should be located on the inside face of the back plate, which is usually covered by an attractive cover for the screw for aesthetic reasons. You should not be able to replace any internal parts of the handle, such as the levers and plates on either side. Keep them in the same order to make it simpler to replace them in the event of a need.

Next, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that fixes it to the internal spindle with another screwdriver. Once this is released, you'll be able to pull the handle away and pull out the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can buy them on the internet or at hardware stores). Securely screw it into the frame. Be careful not to overtighten because this could cause damage to the handle or the window frame.

Ensure the new handle is correctly fitted Close the window and test the handle. It should function smoothly, and you will be able to open your window after a few times.

Make sure to check that your uPVC window is closing properly while you're working with the handle. If they're not closing properly, you could experience damp and draughts inside your home, as and also affecting the energy efficiency of your home. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames so they shut correctly.

Broken Spindle

It is often the case that the spindle inside the handle breaks, rather than the handle itself. This is most common in uPVC tilt-and-turn windows. These windows require a handle to operate a locking device in the window frame. The handle is attached to a central rod which is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle is broken and this could be an extremely frustrating issue.

There are solutions to this problem. A skilled locksmith can quickly and efficiently solve the issue. A professional locksmith will be able to disassemble the handle of the window by using a tool to take out the wheel from the area that houses the spindle. This can be done without damaging the handle or causing other damage to the window frame.

After removing the wheel, the technician will inspect the spindle and identify the reason for its break. This involves breaking down the spindle into its constituent parts and carefully recording their general condition, as in addition to any specific areas of damage or excessive wear. This procedure is typically carried out by technicians in a clean environment.

The next step is to clean the damaged spindle. This will help remove any dirt or debris which may be obstructing it from functioning normally. Following this, the spindle could be repaired or replaced. If it is being replaced the technician can take a dowel of a similar size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centres sell generic replacements. However, if the style of your window is unusual then it will be necessary to speak with a woodworker or cabinet maker who can duplicate the exact part for you. Once the new spindle is in place it can be attached to the handle by line up the screw holes in the handle with the frame's existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.