15 Top Pinterest Boards Of All Time About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If windows with double glazed window repairs near me panes are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth rather than on the floor where they could be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional is able to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap between the window repair and the door is significant, you may prefer a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can access the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as soon as you can to keep your uPVC window repairs near me watertight and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have become undone over time, but it could be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window and then perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be more than happy to give you advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window repairs near me open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again due to wear and tear can become misaligned, this causes gaps to develop between the sash and the frame. They can be repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to have them re-aligned or replaced. The interlock may be disaligned. It is located on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace them.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. However, it is important to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as possible.