Saab 9-3 Key Replacement Tools To Improve Your Life Everyday

How to Replace the Replacement Key Battery For the saab 900 key 9-3

saab key fob repair owners have a distinct set of steps to take to add an additional key. It requires dealer assistance using a handheld computer called Tech-2. Then a new key as well as transponder need to be bought and then programmed to the car.

It is recommended to rotate your keys so that one doesn't wear out more quickly than the other. This will help to keep your keys in good condition.

Replacement Case

In contrast to the traditional saab replacement keys keys of the past, the new key fobs contain electronics which makes it more difficult to copy. This has made stealing cars significantly more difficult than 20 years ago. However, it has made replacing lost keys a more expensive endeavor.

Every owner of a Saab 9-3 needs to have at a minimum two functioning keys. It is costly to replace a lost key as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers will typically charge $100-$200 for this.

There are ways to reduce the high cost. Some parts suppliers will use the code of an extra key to cut a new metal blade for a fraction of that of a dealer. The key must, however, be identical to the original in order to function in your vehicle.

You can also replace the case yourself by following these steps. You will need a flathead screwdriver along with some patience. Using the screwdriver, slowly pry the plastic apart and separate the emergency keys from the case. Once the case has been opened, remove all electronics and put them in your new case. Make sure you put the correct key and badge back in the case too.

Replacement Battery

The replacement saab 9-3 key battery for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. This YouTube video by Cyclone Cyd demonstrates how to replace the battery for the remote fob in only four steps. This tutorial can be used for any modern saab-type key fob, however the procedure might differ slightly.

The first step is to locate the button that will release the backup key within the fob. It's usually close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver in the small hole in this button. This should be enough to unlock the fob's case to allow you to replace the battery.

Once the new CR1632 battery is installed then you can reassemble your remote key fob, and then program it to your car. The whole process should not be more than an hour. This is a very easy procedure that doesn't require special tools.

If you lose a key the process is somewhat more complex however it can be done. The dealer needs to first determine the VIN of the vehicle before requesting the replacement TWICE module as well as key blade with the proper unique code. The dealer will then need to program the key using MDI which is a new software tool.

replacement saab car Keys Key Fob

The key fob contains a battery that is used to lock and unlock your vehicle. The batteries are able to last for and will eventually expire. This is a common problem that affects all cars and the good thing is that you can replace the batteries in most key fobs without replacing the entire case. You can buy replacement fobs from Amazon that come with all the electronic components already installed, so you'll be able to just pop open the case and replace the old batteries. It's important to note that you'll need to take out the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot in the middle of the case. The case will split once you work the screwdriver all around it.

If you're looking to replace your keys, keep a spare on hand. This will save you lots of money. If you have an additional key, you can ask the dealer to cut it and program it to your vehicle. This is less expensive than purchasing a new fob.

It is possible to add a second key to your car even if you don't have one, but it requires a great deal of research and effort. A second key can cost several hundred dollars and it also requires the programming of the car's computer. Professionals can do this however it's a costly option.

Replacement Ignition

The new saab 9-3 replacement key 9-3 is an alarm system that is more sophisticated based on a key code. This means that should you lose only one working key, acquiring another one can be very expensive as the car has to have a unique computer module installed and it must also be programmed to accept a new key. Most locksmiths can't do this and even dealers will charge hundreds of dollars just to program the new key!

If you've lost your only working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge you a premium price for it. Instead we can reprogramme the EEPROM on your existing car computer, preparing it for a replacement key, and save you over 50% of what you'd spend at a dealer.

If you've been an owner of a 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't really all that robust. If your ignition key isn't working properly, you should consider replacing it. They can become very sticky and the buttons are known to fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished quickly.