Why Door Handle Replacement You ll Use As Your Next Big Obsession

Door Handle Replacement

Door handles seem like an insignificant thing but if you aren't happy with the style or design of them, or are unable to use them, it's worth replacing them. Installing the new handle on your door is simple if you have patience.

Modern door handles are typically equipped with cover plates that hide the screws to give them a more attractive appearance. However, you will need to attach them separately if the new handle does not already have them.

Removing the Old Handle

Door upvc windows handles are not only an important aesthetic addition to your home, but they're also crucial for safety as they allow you to lock and unlock your door. Over time, the door handle may become loose or feel a bit loose. It could also appear worn out and old. This is a sign that it's probably time to replace it.

One of the first signs that your door handle requires replacing is when it becomes difficult to operate. This is a problem because it means that you can no longer lock or unlock your door, which could create an security risk to you and your family.

Another reason to replace the door handle is if it's damaged or broken. A broken door handle is dangerous, particularly for children and elderly family members who struggle to open it. They could be trapped. Luckily, it's quite easy to fix a broken door handle by simply replacing the handle that was broken.

Most modern door handles are standard size, so they will fit on any door. If you're not sure if your new door handle will work, try removing the old one and determining the holes in its housing. This will allow you to buy the right size door handle.

It is the easiest way to remove the door handle by unscrewing it from the door. Usually, a screwdriver is used. However, some door handles have an outer cover plate that hides the mounting screws so you'll have to cut off this to reach the screws underneath. Once you've removed your old handle, make an outline of how the spindle is attached to ensure that you can be sure to align it when you install the new one.

You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver to remove the door handle. However, you will need to locate the small latch that is located on the edge trim piece. Once you've removed the latch, you'll need to remove the handle from the strike plate and then the latch from the door edge.

Removing the Strike Plate

You'll need to replace your latch plate after replacing the handle. It's the part that holds the hole through which the door's latch hooks in when the door is closed. The package the new handles come in will have two different latch plates: one that is rectangular and the other a circular one (see the diagram above for the parts of the door handle). If your current latch plate has rectangular, swap it out for the circular one so that the latch hooks onto the strike plate in a way that makes the handle more comfortable to use.

The first step is to take off the screw holding the old latch plate. The screws are usually quite tight and require a bit of force to loosen them. It might be beneficial to get a second person to assist in this area if it is possible.

The latch plate should come out of the door once the screws have been removed. If it's stuck or won't move then use a small nail file to scrape around the edges of the latch plate. This may help free the plate up.

Now you can prepare the new strike plate to be installed. Attach the latch plate to the door jamb using the screws that came with your new handles. Be careful not to over-tighten the screws, as this may cause damage to the strike plate.

If you are not sure whether the latch plate is in the proper position, shut and open the door to check whether it locks and closes properly. If it doesn't then you'll have to adjust the strike plate upwards or down, or forward or back until the door closes and latches correctly.

If the door still moves or jiggles, then you may need to increase the size of your latch hole on the strike plate. This is more frequent for older doors, but could be due to wear and tear hinge mortises that are not deep enough or are not sized correctly for the latch, or due to damage or a broken strike plate. If this is the case, use a metal filing instead of a chisel or hammer to adjust the strike plate.

Take off the Latch

The latch is a bent metal piece that slides into and out of a hole in the inside of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also connects to an opening in the frame of the door to keep your door shut. If your door is wiggles when you close it, replacing the latch may be the only thing needed to fix it.

The screws that hold the door latch are difficult to see, but you can usually use a screwdriver to make a small hole in the trim plate and pry the latch off. After removing the trim plate, you will be able to pull off the latch and the bolts that hold it, as well as the spindle in position.

If the latch won't release it is suggested to use an old-fashioned paper clip or tool to free it from the handle for double glazed window mechanism. Place the item into the recessed latch slot and then gently twist or jiggle until you feel that the latch and handle begin to separate. You may need to repeat this process several times before you can pull the latch out.

After the old latch is removed and the old latch is removed, you should be able to insert the new latch into the slot with no issues. Make sure the latch is positioned correctly in the slot and aligned with the screw chambers and then use the new screws to fasten it to the strike plate and door frame.

Take note of the backset (the distance between the centre of the large hole on the door's front and the edge) prior to installing the new handle. Check that the latch size of the new handle matches the measurement.

You'll require a new cylinder for your lock if replacing the handle and latch, or your old one is damaged. If you're not changing locks, however, a new latch will fit in your existing recess, and be compatible with your current keys. Choose a latch that has rectangular cover plates that match the handles you have.

Take off the cover plate

You can replace your door handles with a new design of roses and levers to enhance the appearance of your home. You can purchase complete sets of door handles that come with matching escutcheons as well as privacy adaptor kits.

To replace the door handle inside, remove the cover plate (or rose), which covers the screws and inner mechanism. Find an opening tab on the plate and use a flathead screwdriver to lift it off the knob. It may have an opening on one edge or be secured by a pin.

Once the cover plate is off take off the screw that holds the interior handle in place, and then set it aside. You'll also want to take out the screws that hold the latch and plates and the latch plate, which can be done by loosening them using a Philips screwdriver. Then, take the inner plates and latch plate from the door and set them aside.

Most doors have a gap between the door jamb and the inner edge of the frame, which allows for a handle, however not all have. If yours does not have a handle, you'll need to drill a hole in the door. This is the same process as opening a door locked however you'll need to be extra careful not to damage the door or frame.

After the holes are drilled then you'll need to install new screws for the door knob. Make sure to buy the same size as the previous ones, so that you don't end up with the handle that is too tight or loose. Installing a new latch and strike rod is also mandatory. They aren't included in all door window handle replacement sets.

If you're looking for a high-quality replacement interior door handle set, try the Amazon's Choice FAERSI two-piece chrome finish upvc handle window set. It's a factory-fit product and has received hundreds of 5-star reviews. It's a great choice to replace worn or damaged interior door hardware on your Chevy.